How to Replace an Oven Heating Element (Step-by-Step Guide)

Oven heating element replacement, on many electric ovens, is one of the most frequent fixes that can be carried out by a careful homeowner if the oven is not heating. The quick answer: Unplug the oven, turn off the breaker, allow the oven to cool, unscrew the old element, disconnect it, and replace it with a same-sized copy of the old element. However, before purchasing anything, be sure that the element is indeed the issue at hand. If the oven still won't heat even after the swap, then stop and, of course, call a technician!

How to Tell if an Oven Element Is Bad:

Most people ask how to tell if an oven element is bad after a cake bakes unevenly or the oven never reaches temperature. A visual check with the oven off and fully cool tells you a lot:

What you see

What it usually means

Oven element not glowing when the oven is on

Element may have failed, or the oven isn't sending it power

Patchy or partial glow

Element is wearing out unevenly

Blisters, bubbles or cracks on the surface

Element is damaged and should be replaced

Burn marks at the terminals

Connection problem; don't just swap the part (see below)

Care needs to be taken with the diagnosis. A dead element may be a result of a faulty thermostat, temperature sensor or control board. When the oven does not heat although the element seems to be in tip-top condition, purchasing a part is a risky proposition. It's time to hire oven repair services, rather than make an educated guess.

Types of Oven Elements: Bake, Broil and Convection:

If you know the types of oven elements, you'll be able to avoid ordering the wrong part.

  • Bottom (bake) element: heats the oven for baking. Most of the ovens have a visible one at the base, and some of the ovens conceal it beneath the floor panel.

  • Top (broil) element: is at the top of the oven and used for broiling.

  • Convection element: a third element in convection ovens.

The top vs. bottom oven element question is important because the elements cannot be swapped. If a generic bake element is being used in an oven bake element replacement, it will not fit the oven.

Before You Start: Model Number and Safety

Find the model number. Look for the rating plate on your oven. It can be located in different places depending on brands: positioned on the oven frame, around the door opening, or behind the storage drawer, consult the owner's manual. Order a replacement oven element using that model number that fits. The most likely cause for a new element not fitting or not working is a guess based on appearance.

Safety first:

  • Unplug the oven, and then switch its breaker off.

  • Allow the oven to completely cool down.

  • Inspect the terminals and wires for burns before to connecting.

  • Never test wiring or work on a live circuit.

If damaged wires, melted wires or damaged terminals are visible, stop. A technician's job would be to do that.

Changing an Oven Element: Step-by-Step

Here is how changing an oven element typically works.  Specifics may differ depending on the brand; check your owner's manual if it is different. The same process is followed to  replacing an element in an oven that has a plug-in style terminal connection.

  • Power off. Break out, unplug oven, cool oven.

  • Remove the racks: Clear racks to access the element.

  • Unscrew the element: It is typically attached to the back wall (or a bracket) with two screws.

  • Gently pull it forward: Remove only enough so that you can access the terminals. Don't let the wires fall back into the wall.

  • Disconnect the wires: Before you remove them, take a picture of the connections.

  • Link the new component:  Connect the wires to the new element's terminal in the same way they were connected to the old element.

  • Secure it: Pull the element back into its opening and tighten up.

  • Reconnect power and test the oven to see if it is working.

If it is the hidden bake element, the floor panel must be removed first, and certain models require additional disassembly. Convection ovens include a fan-area feature. If you are not familiar with a step in your manual, then that is a good reason to stop and call a pro, not continue.

Another point to get assistance is if you're looking to replace an oven element that you can't find instructions for for the model of the oven. If the oven still doesn't heat, stop and call a technician. Don't probe wiring to find the fault.

Gas Ovens Don't Use Elements:

A gas oven doesn't heat from an element, it heats with a burner and igniter. If the gas oven fails to light the igniter or the gas supply is suspect, gas work should only be carried out by a certified gas technician. No one wants to deal with a gas appliance that doesn't work and our team is here to help with the repair.

What It Costs and When a New Oven Makes More Sense:

Many wonder if oven element replacement is worth their while. The price is based on:

  • Since Bake, broil and convection elements are different, the part itself will vary in price.

  • Whether the element is hidden (increases labour time). 

  • If other components such as the thermostat or the control board are also defective.

  • The brand and type of your oven.

If you are dealing with a specific oven, you should request a quote in advance of work.

Repair vs. replacement: An element is typically a minor repair versus a new oven, and in this case, it may make more sense to repair a newer, well-built oven. If the oven is getting on in age, it's hard to find parts, the control board has gone, or the repair job quote is approaching the cost of the new oven, it's time to consider a new one.

When to Call a Professional:

When a technician should be called:

  • The new element doesn't fix the problem.

  • Burned terminals and wires, or melted insulation are found.

  • It's OK, the oven just doesn't heat.

  • The oven is a gas oven.

  • You aren't comfortable working near wiring.

A technician can also check the thermostat, sensor and control board, which are often behind "it looks like the element" problems. Our oven repair service covers element diagnosis, replacement and related faults, and many customers look for same-day oven repair when dinner plans are at stake.

Local Oven Repair Across BC and Toronto:

We serve homeowners in Greater Vancouver, the Fraser Valley and Toronto. If you need oven repair Surrey or oven repair Vancouver, see our pages for appliance repair in Surrey and appliance repair in Vancouver. We also help with oven repair Burnaby, oven repair Langley and oven repair Abbotsford. In Ontario, find us at appliance repair in Toronto, including oven repair Toronto. Searching appliance repair near me? Any of these pages is a good place to start.

Keep Your Oven Heating Evenly:

A few habits extend element life:

  • Wipe up spills once the oven is cool, since baked-on spills can damage an element.

  • Don't let foil or bakeware touch the element.

  • Watch for early warning signs like slower preheating.

If you'd like regular upkeep, look at our appliance maintenance plans. Buying the part yourself? Browse replacement oven elements.

FAQs:

Can you replace an oven element yourself?

Often yes, on electric ovens with a plug-in terminal connection. Turn off the breaker, unplug the oven, let it cool, and use the correct part for your model. Gas ovens and damaged wiring need a professional.

How do you know if your oven element is bad?

Look for an element that doesn't glow, glows unevenly, or has blisters or cracks. Because a faulty thermostat, sensor or control board can look the same, a technician can confirm the cause if you aren't sure.

How much does it cost to replace an oven element?

It depends on the oven brand, the element type, whether it's hidden, and whether other parts are also faulty. Ask for a quote for your specific oven before work begins.

How long does it take to replace an oven element?

A standard visible bake element is often a quick swap once you have the right part. Hidden elements and convection models take longer.

Is it worth replacing an oven element?

Usually, yes, if the rest of the oven is in good shape. If the oven is old or has other failed parts, compare the repair quote to the cost of a new oven.

Can you use an oven with a broken element?

If the element is cracked, blistered or sparking, don't use the oven. A partly working element can still heat, but poorly and unevenly, so you'll get unreliable results.

Need Help With Your Oven?

If the oven still isn't heating, or you'd rather not work on it yourself, our technicians can diagnose and fix it. Book a repair and we'll take it from there.